HIMALAYAN SALT TILES 1sq.mt- 20x10x3 CM

1.1       HIMALAYAN SALT SAUNAS:

A.          Provide manufacturer's standard interior finishes, pre-hung door, and trim; designed to be constructed as a permanent part of the structure.

1.          Framing: 2 inch by 4 inch (51 mm by 102 mm) nominal kiln-dried, Douglas fir studs; or metal studs with 3/4 inch (19 mm) fire retardant plywood attached to provide a nailing surface; stud framing on maximum of 16 inch (406 mm) centers. Where sauna walls are built with CMU, add 3/4 inch (19 mm) fire retardant plywood to the CMU; if building with metal studs they should be built using 54 mils (16 ga) minimum studs.

2.          Insulation: 3-1/2 inch (89 mm) fiberglass batt compressed to fit size of framing; with foil vapor retarder installed on interior side of sauna. Provide a 7 inch (178 mm) layer of insulation at ceiling.

3.          Interior Wall and Ceiling Paneling: 1 inch by 6 inches (25 mm by 152 mm) nominal V-joint, tongue-and-groove wood boards of species and grade indicated; sanded smooth; kiln-dried to no more than 12 percent moisture content. Attach to wall horizontally or vertically based on framing construction methods or customer preference.

4.          Wood Species: Clear Western Red Cedar.

** NOTE TO SPECIFIER ** All sauna doors open to the outside of the sauna, not to the inside.

5.          Door: Manufacturer's standard, solid core, prehung door with glass vision panel as follows:

a.           Door Wood Species: Western Red Cedar.

b.          Jamb and Casing Wood Species: Western red cedar.

c.           Glass Vision Panel: Preassembled units consisting of insulating/tempered-glass units made from two lites of 5/32 inch (4 mm) thick with 7/16 inch (11 mm) air space, clear glass double sealed. Provide jamb and casing of western red cedar and complying with ASTM E 774 for Class CBA units.

** NOTE TO SPECIFIER ** All sauna doors open to the outside of the sauna, not to the inside

d.          Specify if ADA door or standard door. All doors are undercut 1 inch to 1 1/2 inches to provide proper and sufficient air flow into sauna. Do not cut vents or other openings in sauna walls unless required for sauna heater.

6.          Door Hardware: Provide one pair of self-closing brass hinges (top and bottom), one brass butt hinge(center), one ball catch, and two wood door pulls (interior and exterior of door) of Western Red Cedar.

7.          Benches: Western Red Cedar, S4S, 2 inch by 4 inch (52 mm by 102 mm) nominal wood boards, spaced not more than 1/2 inch apart and supported by 2 inch by 4 inch (51 mm by 102 mm) nominal wood framing.

8.          Interior Base, Corner, and Trim: Same wood species as interior paneling

** NOTE TO SPECIFIER ** Select the following optional salt wall paragraph if required. Delete if not required.

9.          Himalayan Salt Wall: Himalayan hygroscopic, natural ionizing, pink salt bricks assembled into panels with 6 salt bricks per panel. Panels are provided with stainless steel mounting hardware.

a.           Overall Panel Size: 15.5 inches wide by 17.24 inches high by 1.75 inches thick.

b.          Panel Material: 16 gauge 304 #4 stainless steel.

c.           Individual pink salt block size 5.75 inches high by 7.75 inches wide by 1 inch thick.

d.          Stud wall (if metal – only where salt panel will be located) should be built using 54 mils (16ga) minimum studs.

e.           Wall lined with .75 inch (3/4 inch) plywood.

** NOTE TO SPECIFIER ** Select the following optional backlighting paragraph if required. Delete if not required.

f.            Backlighting: Color changing LED backlighting.